• 2-in-1 hanger for post-dive dry suit and regulator drying
• Lightweight structure yet ultra strong in strength.
• Built-in dummy cylinder valve for easy regulator attachment (DIN / yoke compatible).
• Can be disassembled to save storage space.

Instruction:

To assembly / disassemble

• With the yoke dimple facing upward, insert the hook all the way through the hole in the center of the hanger’s frame.
• Turn the assembly upside down and slide the C-clip fully into the slot at the end of the hook.
• After ensuring the unit is put together correctly by gently tug the hook and the frame, the hanger is ready for use.
• When not in use, the hanger can be disassembled (reverse the above steps) before putting away to save storage space.

Hanging your dry suit and regulator set

• Slide each ankle of the suit into a slot in the hanger’s main frame so your suit wills be upside down when hanging.
• Only use a reliable rack that is able to take the weight of your diving equipment.
• Attach the first stage to the dummy valve and rest all hoses and attachment evenly along the regulator hanger (the small hooks along the outer edge of the frame).

Important:

• This hanger is only intended to be used for dry suit and regulator set drying.
• When drying, remember to keep your equipment in a well ventilated area away from sun light.
• Please remove your equipment from the hanger as soon as they are dried; never store them on the hanger.
• Please store your hanger in a cool, shaded area.